Connection description
All content and specifications are subject to change without prior notice.
CAUTION
No servicable components
Do not disassemble
Caution
- Make sure Correct input voltage is provided
- This equipment must be installed in a controlled environment.
- Only suited for permanently powered systems.
- Make sure the power supply is well ventilated.
- This equipment must be grounded.
- Use 2.5mm2 gauge mains wire.
-Improper storage and installation environment may shorten the life of this
equipment and cause malfunctions.
Over-voltage protection
Over-current protection
Short circuit protection
Protection
Over charge protection
Over discharge protection
*
BATTERY TEST SWITCH
Before connecting to AC power for the first time, this switch can be used for activating the battery;
After connecting to AC power, the battery will be activated automatically during AC power failure,
without pushing this switch.
N
L
GND
AC INPUT
12V1A,2A,3A
BATTERY
OUTPUT
FUSE
5X20
LED(GREEN)
LED(RED)
BATTERY
DC OUTPUT
OUTPUT FUSE
INPUT FUSE
BATTERY
TEST
*
AC INPUT
12V5A
BATTERY OUTPUT1
N
L
GND
FUSE
5X20
LED(GREEN)
LED(RED)
BATTERY
DC OUTPUT
OUTPUT FUSE
INPUT FUSE
BATTERY
TEST
OUTPUT2
*
www.wboxtech.com
REV1
