600 Intivo Space Larder Unit Assembly
Components
Ref. No.
Item
Quantity
Ref. No.
Item
Quantity
Tools Required
Assembly Instructions
1
3
5
151999
152401
4
152418
4
152402
2
150101
20
3.5x12mm
150202
8
4x12mm
4x15mm
150201
16
154085
14
154004
14
154082
12
150199
4
4.5x45mm
4
154027
A
B
C
D
E
B
B
150308
4
150309
4
154047
2
154068
4
152162
6
Intivo Space Unit
Caution: Some pieces of hardware could be hazardous to small children. Keep all these items out of reach and do not leave children unattended in the assembly area.
Please read these instructions carefully before proceeding. Refer to the Guide to Receiving and Installing your Kitchen for further information.
Note:
Due to variation in wall conditions no screws are supplied for fixing the units to the wall. If in doubt consult an expert. Assemble the unit on a clean solid work surface.
Important:
Installation should be carried out exactly according to the manufacturer’s instructions otherwise a safety risk can occur if incorrectly installed.
Warning:
Assess the suitability of the wall/ceiling to ensure that the fastening devices will withstand the forces generated. In order to prevent falling down this
product must be used with the wall attachment devices provided.
In the interest of continuing improvements we reserve the right to amend or adjust the specifications without prior notice. Errors and omissions excepted.
Every effort has been made to ensure that this product leaves the factory in perfect condition. In the unlikely event that an item is damaged or incorrect, please contact the customer services department.
FM 665131
5mm
Drill
G-Clamp
(pair)
Medium Crosshead
Screwdriver
Hammer
Spirit Level
Bradawl
Tape Measure
Large Flathead
Screwdriver
8mm
Tall Intivo Space Unit
F
1
2
3
Holes to be drilled 5mm in diameter and 12mm deep.
Holes to be drilled 8mm in diameter and 12mm deep.
Holes to be drilled 5mm in diameter and 12mm deep.
NOTE: Only required on side panel that will have the door hinged to it.
NOTE: Before assembly can be being, a number of additional holes must be drilled
into each side panel. See diagrams for drilling positions, and key for hole dimensions.
1
37mm
115mm
339mm
37mm
101mm
389mm
421mm
57mm
397mm
738mm
1037mm
1280mm
1372mm
1404mm
266mm
298mm
605mm
948mm
980mm
1
1 2
2
3
3
1470mm
1
1
1
1
1
3
3
3
3
3
1
1
1
1
1
37mm
115mm
339mm
57mm
397mm
738mm
1037mm
1280mm
266mm
298mm
605mm
1
1
1
1
1
3
3
3
1
1
1
1
1
Top of Panel
Standard
Height Units,
right side
shown only.
Mirror for left
hand side
panel.
Top of Panel
Tall Height
Units, right
side shown
only. Mirror
for left hand
side panel.
A
A
35mm
152183
6
151500
2
154084
2
G
A
Important Information -
True Handleless Kitchens Installers
: See Note Above
TH
Note: If fitting a “True
Handleless” kitchen,
some components will
differ to those shown in
this instruction and will
also be packaged
separately. Please refer to
your True Handleless
guide to Receiving for
further details on the
different components and
difference in installation.
TH
TH
Modification required at this stage, see True
Handleless guide for further details.
