WD TV Live Streaming Media Player
User Manual
FEATURES AND FUNCTIONS
– 9
LED Indicator
Item
Component
Description
1
Infrared
receiver
• Receives signals from the remote control. Point the tip of the
remote control to the infrared receiver and ensure that the path
between the two is unobstructed.
2
LED
• On—The power cable is connected and the power is on.
• Off—The media player is in standby mode , turned off, or the
power cable is disconnected.
• Steady flashing— A USB device has been discovered and the
unit is being mounted in the system. If the Media Library is set
to On in the Setup options (see “Media Library Compilation” on
page 54), the LED flashes at the same steady constant rate.
• Three short flashes followed by three long flashed followed by
three short flashes—A system diagnostic failure has occurred.
See “Troubleshooting” on page 202.
1
2