Fragrance Dosing, Type DUFTDOS-DS
Index: 01
Date modified: 20.09.2017
BA no.: BA DW 015-01 Duftdos-DS EN 14168-21659.docx
Page 13 of 28
5
Commissioning
Commissioning - comments
The work activities described here must only be performed by appropriately qualified personnel belonging to
a specialist company. Alternatively, the work can be carried out by persons who have read and understood
the entire operating instructions. Prior to commissioning, the installed systems must be checked for proper
installation and leaks.
Use the commissioning protocol when commissioning, see
Section 9.3.
The device comes loaded with factory-defined settings. Set the control parameters to the desired operating
mode during commissioning.
Commissioning tasks
Ensure that the device has been correctly installed and connected.
5.2.1
Set the dosing times at the control board
1.
Pull power plug.
2.
Unscrew the device and pivot the casing cover downwards.
3.
Set dosing times in accordance with the terminal diagram.
4.
Renew the casing cover.
5.
The power plug remains disconnected.
5.2.2
External control / external key operation
1.
Pull power plug.
2.
Unscrew the device and pivot the casing cover downwards.
External control
Terminals 3-4 can be used to connect an external control with potential-free on/off contact. For this purpose,
the jumper must be removed from 3 to 4 and the external contact must be connected. If the external control
contact is closed, the dosing pump will operate with the set dosing performance.
External key operation
An external switch with potential-free contact can be operated at terminals 3 and 4.
For this purpose, the jumper must be removed from 3 to 4 and the external switch must be connected. When
the switch is activated, a dosing impulse will operate. During this time, the light ring on the switch will be
illuminated. Once the pause time has expired, a new dosing impulse can be activated using the switch.
3.
Renew the casing cover.
4.
The power plug remains disconnected.
Summary of Contents for DUFTDOS-DS
Page 30: ......
