Dosing Device Foamdos V6
Index: 01
Date modified: 26/08/2019
OI No.: BA DW 025-00 Foamdos V6 EN.DOCX
Page 10 of 37
3.2.6
Suction lance
The suction lance is used to suck the foam concentrate out of the
canister. The suction lance is screwed on in place of the canister lid
and can be adjusted in height.
Tip!
If the thread of the suction lance does not fit the
delivery container, the canister lid of the delivery
container can be used.
3.2.7
Drain valve (accessory)
If the technical room is located on a floor below, a drain valve (solenoid valve) can be installed to empty the
standpipe to the treatment room. The water in the line would cool down and this would delay the next foam
production.
3.3
Device identification / identification plate
Enter the data from your device’s identification plate here.
Field 1:
Enter serial number
Field 2:
Enter date of manufacturing
Figure 6, Identification plate
Figure 5, Suction lance
