Dosing Device Foamdos V6
Index: 01
Date modified: 26/08/2019
OI No.: BA DW 025-00 Foamdos V6 EN.DOCX
Page 18 of 37
3.
Insert the hose bracket into the casing's guides until it firmly snaps into place.
4.
Turn the roller carrier clockwise and carefully press the hose into the casing
until the entire hose is contained in the casing.
Now replace the safety disc and the transparent pump cover. This completes the installation of the roller
carrier.
The dismantling of the roller carrier and the hose bracket occurs in the reverse sequence.
5.2.3
Establish power supply
1. Ensure that all installation tasks have been completed. Observe the sequence of the commissioning
works.
2. Insert the mains plug into the socket.
Figure 15, Turn roller
carrier
Figure 14, Insert hose
bracket
