Dosing Device Foamdos V6
Index: 00
Date modified: 18/05/2021
OI No.: BA DW 025-00 Foamdos V6 EN.DOCX
Page 5 of 37
1.4
Warranty
All devices and systems of the Co. WDT are manufactured using state-of-the-art manufacturing methods and
are subject to a comprehensive quality control. However, should there be a reason for complaint, any
compensation claims shall be directed to the company WDT in accordance with the general terms and
conditions of warranty (see below).
General terms and conditions of warranty
The company WDT assumes a 2-year warranty, starting with the commissioning, up to 27 months after
delivery; subject to correct installation and commissioning with a completed and signed commissioning
protocol.
Exempt from this are wear parts such as gaskets, hoses, diaphragms, dosing screws, electrodes, roller carriers
and other parts that are subject to mechanical or chemical wear and tear. For these we assume a warranty of
1/2 year.
Our merchandise management programme requires an invoice for each delivery (including warranty services).
When returning a defective component, upon review you will receive a corresponding credit, if applicable.
We request a return within 14 days.
The costs for subsequent damages and for the processing of warranty claims are excluded.
There are no warranty claims for damage caused by frost, water and electrical overvoltage or by improper
handling.
Tip!
For the safeguarding of any warranty claims, please send the completed commissioning
protocol, together with the defective component, to WDT. Without the
commissioning protocol, we reserve the right to assert a warranty regulation.
ATTENTION!
It is not permitted to make any modifications to the device. If this specification is not
observed, the warranty obligation and product liability will expire!
1.5
Further information
Further information about special topics, e.g., description of the operating parameters, as well as additional
support is available from your specialist dealer.
