CPR Touch XL, Steuereinheit
Index: 02 Änderungsdatum: 20.03.2017
BA-Nr.: BA MR 001 02 Steuereinheit CPR Touch XL DE.docx
Seite 28 von 68
Hauptmenü
Einstellungen
Desinfektion Chlor
Alarm low:
unterer Alarmwert
P-Bereich:
Die Dosierung arbeitet proportional, d.h. je
größer die Differenz zwischen Sollwert und Istwert, desto
länger ist die Dosierzeit (max. 15 Sekunden).
Je kleiner der Regelbereich gewählt wird, desto schneller
reagiert der Messwert und desto leichter kann es zu einer
Überdosierung kommen.
Sollwert:
diesen Wert versucht das Gerät zu erreichen
Alarm high:
oberer Alarmwert
Dostime Limit:
wird der Regelbereich nicht innerhalb
drei x der eingestellten Zeit erreicht, wird die Dosierung
gesperrt.
Wichtig!
Diese Störung muss manuell quittiert werden!
Hauptmenü
Einstellungen
Dosierleistung
Das Menü Dosierleistung dient zur Anpassung der Dosierleis-
tung an den voraussichtlichen Chemikalienverbrauch des Pools.
Gerade bei geringeren Wasserinhalten ist es sehr wichtig die
Dosierleistung anzupassen.
Die nötige Dosierleistung ist von mehreren Faktoren, wie
z.B. Beckenvolumen, Standort, Nutzungsart und natürlich
der Frequentierung der Badegäste abhängig.
pH:
Dosierzeit der Säure in Sekunden
Desinfektion:
Dosierzeit Chlor in Sekunden
Zykluszeit:
Länge des Gesamtzyklus in Sekunden
Handdosierung:
Wechsel zwischen Automatik- und Hand-
dosierung
Erläuterungen zur Zykluszeit
Die kürzeste Zykluszeit beträgt 30 Sekunden, d.h. alle 30 Sekunden wird die Dosierung proportional, in
Abhängigkeit der Sollwertabweichung mehr oder weniger lange aktiviert.
Sie ist einstellbar von 1 bis 8 Sekunden Dosierzeit für die Säure- Dosierung mit nachfolgenden 4 Sekunden
Pause. Anschließend 1 bis 15 Sekunden Dosierzeit für die Chlor- Dosierung, mit nachfolgenden 3 Sekunden
Pause.
Nun folgt eine weitere Pausenzeit, bis die gesamte Zykluszeit abgelaufen ist. Eine Verlängerung der Zykluszeit
verlängert die zweite Pausenzeit und reduziert damit die maximal zur Verfügung stehende Dosierleistung
Diese wird in % angezeigt.