operation manual SAUNA-VII (07/12)
page 2 of 14
1
2
3
4
5
6
7
8
9
1.
Function
The splash automatic SAUNA-Plus VI doses the splash full automatically to
the sauna oven.
The dosing cycle, the intensity of the splash (quantity of water) and the
arome-intensity (quantity of fragrance) are adjusted individual by 3 rotary
knobs.
For the dosing the solenoid valve (4) opens and the splash water flows to
the Sauna-oven. The water is accumulated at the diaphragm that is
installed behind the pressure switch (5). A certain pressure is built up. If
this pressure gets higher than 1,2 bar the fragrance dosing released, the
dosing pump (8) doses the adjusted fragrance quantity over the dosing
valve (9) into the water that streams to the oven. A a result it is ensured
that the fragrance concentrate is only dosed when there´s pressure in the
water tubing. Additionally the installed security combination (non-return
valve + blower) (3) ensures that no splash water is sucked back into the
supply tubing when there´s a sudden pressure loss (according to DIN
1988). A locker ball valve ½“ (1) and a fine filter (2) are switched in in
front of the solenoid valve.
Attention!
For the prevention of a flooding of the Sauna-room the Sauna-Plus has
necessarily to be locked electrical with the Sauna-oven. The internal time
delay of app. 30 minutes prevents the first splash onto the cold oven. If
necessary the time delay can be switched-off (e.g. at an external start of
the splash).
knob for fragrance
knob for water
rotary knob for cycle
10 to 60 minutes
programme and test
switch
pilot lamps LED
