UP35-4481N26000-02/15
– REV.B1
Page 39 / 63
+
Check the release button before starting the work on the crimp machine. In the case of
imminent danger immediately press the release button. The release button must be within
the direct reach of the operator. It must not be covered.
+
Exercise caution at all times when the pneumatic Parallel Crimp Machine UP 35 is
switched on.
+
The pneumatic Parallel Crimp Machine UP 35 is only allowed to be operated with a
mounted adapter with die set and suitable safety guard. Pay attention to the correct
assignment of adapter to safety guard.
+
The pneumatic Parallel Crimp Machine UP 35 may only be set up and operated in perfect
technical condition, observing all the safety regulations and considering any possible
dangers.
+
In cases of a machine malfunction, production must be stopped and the malfunction must
be fixed before continuing work with the machine.
+
Work with caution.
+
Only one person is allowed to work on or with the machine at a time.
+
Only trained personal are allowed to work on or with the machine.
+
It is only allowed to work with the specified crimping force.
+
When working with the pneumatic Parallel Crimp Machine UP 35, do not wear loose
clothing, jewelry or long, loose hair that can get caught in the pneumatic Parallel Crimp
Machine UP 35.
+
Disconnect the pneumatic Parallel Crimp Machine UP 35 from the air supply before
attempting any maintenance work. Due to the risk of hand or finger injury, never try to
reach into the machine before having assured that the machine is disconnected from the
air supply.
+
The machine can only be depressurized by disconnecting the machine from the main air
supply Air MAX.
+
Wear protective gloves and safety glasses during lubrication work. Please pay attention
to the safety instructions in the “safety data sheet” of the grease.
+
During transport of the machine wear suitable safety shoes.
2.3
Responsibilities
The pneumatic Parallel Crimp Machine UP 35 may only be operated by suitably trained and
authorized personnel. The user must clearly define and observe the responsibilities of the
personnel for operation, set-up, maintenance and service. It is particularly important to define
who is responsible for work on the pneumatic equipment. Such work should only be carried
out by specially trained staff.
Should the user make any changes to the machine without consulting the manufacturers or
the distributors, the latter will not be liable for any damage that may result.
The user of the pneumatic Parallel Crimp Machine UP 35 is responsible for making sure that
all persons involved in any way, either in the installation or in maintenance of the machine,
have been thoroughly trained on the system using the this operating instruction.
The user is also responsible for the training of operators and the instruction must include the
following aspects:
+
Purpose of the machine
+
Hazard zones
+
Safety rules and regulations
+
Functionality of the various components of the machine
+
Proper operation of the machine
