UP35-4481N26000-02/15
– REV.B1
Page 51 / 63
+
Remove safety guard
1
.
+
Extract the upper and lower part of the
adapter.
+
Choose the correct die set.
+
Remove special screws
2
from the die.
+
Refer the upper and lower die to the right
adapter and fasten the screws.
INFORMATION
+
Control the right position of the die halves! The size of the profile should be in line!
+
If necessary put the locator on the locator
holder
3
.
+
Slide the upper and lower adapter
together.
+
Install the safety guard
1
.
2
3
1
1
Fig. 7.4
Fig. 7.5