Installation Procedure - RAIL66/CANTILEVER
6ZLWFKRĪWKHPDLQVHOHFWULFDOVXSSO\
2) Remove covers A
E\UHOHDVLQJVFUHZV
B.
&KHFNWKDWUDWLQJVKRZQRQSURGXFWODEHO
conforms with mains electrical supply.
5HPRYHZDOOĦDQJHV
C
E\UHOHDVLQJVFUHZV
D.
'HWHUPLQHSRVLWLRQVIRUĥ[LQJEROWV
E.
'ULOOUHOHYDQWKROHV
F and insert nylon plugs G.
Warning:
0DNHVXUHQRWWRGDPDJHDQ\HOHFWULF
FDEOHZDWHUSLSHRURWKHUGHYLFHVZKLOHGULOOLQJ
holes.
)HHGPDLQVVXSSO\FDEOH
H
WKURXJKFDEOHJODQG
I,
ZKLOHVHWWLQJDQGĥ[LQJZDOOĦDQJHV
C in position.
Attention: Bolts E
VKRXOGRQO\EHIXOO\WLJKWHQHG
DIWHUDOLJQPHQWKDVEHHQFRQĥUPHG
7) Connect mains supply leads to respective
terminals in terminal connector J (L = Phase,
N = Neutral , = Earthing).
6OLGHUDLODVVHPEO\
X
FDUHIXOO\RYHUZDOOĦDQJHV
C.
Pay particular attention to tension-free alignment
of terminal connector J. Tighten screws D
LQDFULVVFURVVSDWWHUQIRUSURSHUJDVNHW
compression, evenly.
Warning: In the process, do not apply any load to
UDLODVVHPEO\
X.
7LJKWHQEROWV
E.
5HSRVLWLRQFRYHUV$DQGVHFXUHLQSRVLWLRQE\
tightening screws B.
11) For luminaire installation, see overleaf, dedicated
installation instructions.
Attention:
&KHFNDQGHQVXUHSURSHUĥWDQG
tightness of protective covers Z’ on mains
outlets Y’. Remove cover(s) only when installing
luminaire(s).
Installation - RAIL66/CANTILEVER
