5
'HWHUPLQHSRVLWLRQIRUĥ[LQJVFUHZV
E.
Drill relevant holes F and insert nylon plugs G
(not supplied by WE-EF).
Warning: Ensure not to damage any electrical
cable, water pipe or other items drilling holes.
Fixture is intended to be mounted over a UL
listed junction box (not supplied by WE-EF),
use provided wall plate to cover boxes larger
than the outer dimensions of the luminaire.
5) Feed mains supply cable H (and seond
cable I for through wiring, if required)
through pressure screw(s) J, while setting
ZDOOĦDQJH
A in position.
The pre-installed packing ring P is suitable
for cable diameters
0.276 to 0.374 in.
For larger cable diameters (0.354 to 0.472 in)
use the auxiliary packing ring supplied.
7Rĥ[ZDOOĦDQJH
A, insert and tighten screws E.
7KHRULHQWDWLRQRIZDOOĦDQJH
A detemines
orientation of luminaire (up or down)
Downlight
3) Check that rating shown on luminaire label
conforms with mains electrical supply.
(example)
PLS420-LED 120-277V/60Hz
131-XXXX SOE
XXXXXXX
LED 3000K 18W item no. XXX
12/18 IP66
Uplight