6
7) Connect leads of mains supply cable H
(and second cable I for through wiring,
if required) to respective terminals of socket K:
a) ON/OFF (L = Phase, N = Neutral,
= Earthing)
LN
DIM
+
DIM
–
LN
DIM
+
DIM
–
8a) ON-OFF version
Position luminaire housing B
RYHUZDOOĦDQJH
A and reconnect terminal connector D.
Tighten 4 screws C both on top and bottom.
8b) Dimming versions (0-10 V)
Position luminaire housing B
RYHUZDOOĦDQJH
A and reconnect terminal connector D.
Return terminal cover L. Tighten 4 screws C
both on top and bottom.
b) 0-10 V (L = Phase, N = Neutral,
= Earthing, D–/D+ = 0-10 V control line).
