3
Installation Procedure
1) Switch off the mains electrical supply.
2) Check that rating shown on luminaire label conforms
with mains electrical supply.
3) Feed mains cable
A
into outreach bracket
C
and
pole, while setting luminaire assembly in position.
Tighten screws
B
.
4) Trim mains supply cable
A
to the desired length and
connect leads to their respective terminals at the
base of pole
(L = Phase, N = Neutral, = Earthing).
Installation
The product must be installed and maintained by a
VXLWDEO\TXDOLƂHGSURIHVVLRQDOLQFRPSOLDQFHZLWKODWHVW
building/construction and/or electrical regulations and
relevant legislation.
The supply cable must be installed inside the pole and
not be exposed to the outside environment.
Warning:
Switch off mains electrical supply prior to
installing and connecting the luminaire.
Notice:
,IWKHOXPLQDLUHLVPRGLƂHGE\DQ\ERG\RWKHU
than the original manufacturer, then the warranty will
no longer be valid and shall become the full respon-
sibility of the modifying person/organisation. Claims
based on defects attributable to improper installation
and/or application, and the consequences thereof, are
excluded.
Summary of Contents for VFL530-SE LED
Page 5: ...4 L N Supply cable...
