BeHear ACCESS User Manual
Page 23 of 39
Product Name: BeHear ACCESS
Product No.: ABH-120
Doc. No. BHAUM202012.31
Connection with an iOS Phone
1.
Tap the
BeHear ACCESS
icon in the Connection screen to initiate connection with your
headset.
2.
Tap
NO
if your headset is not paired with the iPhone, otherwise tap
YES
.
3.
When your selection is
NO
:
a.
Follow the on-screen animated instructions to place your headset into
•
Make sure the BeHear
ACCESS
headset is powered OFF.
•
Then, press and hold down the power button
on the headset for
up to 5
seconds
, until the headset vibrates and the LED alternates red/blue.
b.
Use the Bluetooth section of the
Settings
application on your phone to add BeHear
ACCESS to the list of
My Devices
.
c.
Return to the W&H BeHear app and tap
YES
in the connection screen.
4.
When your selection is
YES
:
a.
The product name
BeHear ACCESS
followed by the last several characters of the
device’s serial number will appear in the list of
Available
devices. You can verify the
device by checking that the serial number printed on the underside of the BeHear
ACCESS headset (on the white label) matches the number in the list.
b.
The
Bluetooth Pairing Request
prompt appears.
c.
Select
Pair
and wait for 2-3 seconds to complete the synchronization.
d.
When the pairing and connection process is complete the headset will be listed in the
Paired
devices section, followed by a
.
