BeHear ACCESS User Manual
Page 9 of 39
Product Name: BeHear ACCESS
Product No.: ABH-120
Doc. No. BHAUM202012.31
•
If the LED turns
green
the status is good (more than 50% battery charge remains).
•
If the LED turns
yellow
the status is fair (battery charge level is between 10% and 50%).
•
If the LED turns
red
the status is low (below 10%) and the headset needs to be recharged.
Checking the Battery Level using the Application
When the device is powered on, view the level in the battery
icon which appears at the top of each screen. The more white
filler you see, the more charge is left in the battery. The amount of charge left is also displayed
as a numerical value measured in percentage.
Note
: During headset use, if the battery level drops below 10% the LED will flash red and a voice
alert will be heard periodically.
Wearing Instructions
BeHear ACCESS is a neck loop style headset where the hard plastic part is meant to rest on the
back of your neck (or under your collar) and the ear buds at the ends of the cables come up
from your collar bone and are inserted into your ears.
Wear your BeHear ACCESS headset as described below:
1.
Place the BeHear ACCESS neckband behind your neck such that the
power button is on the bottom and the control boxes are on your
chest and the buttons of the control boxes face up.
2.
Insert the earbuds and position the ear hooks inside your ears. Your
BeHear ACCESS package contains several sizes and types of silicone
ear hooks and buds, and you may have to experiment to find the
combination that fits your ears most comfortably for continuous
wear.
3.
You can move the clips along the cable to reach desired cable length
and position.
4.
You can add foam covers to the earpieces to improve the acoustic
performance of your BeHear ACCESS headset when using it
outdoors in windy conditions. The covers also reduce noise
produced by the friction of your clothing against the earpieces.
5.
When not in use, secure earpieces to each other with the built-in
magnets.
Fitting the Ear Buds and Hooks to Your Ears
Your BeHear ACCESS headset comes with three shapes of silicone ear buds: conical, mushroom,
and tulip (open fit) in up to four sizes, and three sets of ear hooks in varying sizes. The most
common type and size of buds and hooks have already been attached to the headset. However,
if the buds do not fit snugly and comfortably in your ears you should remove the silicone covers
from the earpieces and try different options, as follows:
