BeHear ACCESS User Manual
Page 6 of 39
Product Name: BeHear ACCESS
Product No.: ABH-120
Doc. No. BHAUM202012.31
Device Overview
BeHear ACCESS is a neck band style headset comprised of:
A
– Electronics compartment
B
– Left and right earpieces
C
– Left and right control boxes
Icon Component
Function
1
Notification LED
Flashing red and blue
Headset is in Bluetooth pairing mode
Flashing blue
Headset is connected to the Bluetooth
device
Flashing red
Headset is not connected to the Bluetooth
device, or the battery is low
Flashing purple
Personal hearing is active
Steady red
Headset is being charged
Steady green
Headset is charged (battery level >50%)
Light blue
Headset is powered on/off (toggle)
2
Micro-USB port
Open the cover to insert the supplied cable to charge the battery.
3
Charging port
Place this side down in the charging cradle to charge the battery.
4
Power button
Press and hold down to turn BeHear ACCESS on and off.
Press briefly to show battery level (when BeHear ACCESS is on).
5
Volume up button
Press (short presses or continuous press) to increase call/audio
volume.
6
Multi-functional
button
Handle phone calls (read
Handle listening to audio (read
7
Volume down button
Press (short presses or continuous press) to decrease call/audio
volume.
8
Hearing volume up
button
Press (short presses or continuous press) to increase ambient sound
volume.
