Page 26 of 34
Weatherdock AG
frequencies. All AIS-vessels will get an alert message on their
plotters together with your position. It should always start
with "97022.....", because this is the official numbering of AIS-
SART. We strongly recommend not changing this number.
The manufacturer has provided a unique number here.
6.2.2.
MMSI (ON)
This is the MMSI, which is sent in normal operation. You can
choose any 9-figure number you want, because the unit is
sending on proprietary frequencies (NOT on AIS).
6.2.3.
Frequencies
Here you should enter the frequency you have got a license
for.
It could be a a single frequency, so both channels have the
same value.
Or you have got two frequencies, which are used in an
alternating way, as known from the AIS.
6.3.
Firmware Update
With the Programming Tool you have the possibility for
updating the internal software of the easyPOSALERT (called
firmware). So you can keep the unit always up to date.
For updating press on "File => Update", then the Update
window occurs.
