Page 16 of 36
Weatherdock AG Sigmundstraße 180 D-90431 Nürnberg
Tel.:+49 911 37 66 38 30 www.weatherdock.de
As a general rule for a case of application:
After activation of the device the batteries need to be
exchanged by an authorized service partner. This is
necessary to ensure the mandatory operating time of
the device.
3.1.3.
Activation via magnetic switch
only for version A040-BW-COM
The easyRESCUE-BW-COM is suitable for the use with
automatic life vests or in life rafts. The magnetic
switch is built into the upper edge of the device. The
magnet sensor is internally arranged and on the
outside a small magnet retaining plate with a ripcord.
The ripcord is attached to a suitable position on the
life vest or life raft by means of the spring hook.
If the ripcord is under tension when the used personal
buoyancy opens and inflates automatically the small
magnet retaining plate is yanked from the bracket
and triggers the magnet sensor.
This results in the automatic activation of the
easyRESCUE-BW-COM.