Begin by adjusting your Guide (N) according to the material you’re going to cut. Insert the leather through the
front of the machine, holding it steady against the Guide (N). Slowly crank the handle. The combined action of
the bottom roll and the blades convey and cut the material, forcing it out of the back of the machine.
1. To adjust the material Guide (N), loosen the thumb screw and adjust by sliding the Guide (N) to the left or right.
OPERATING THE MACHINE
TROUBLESHOOTING
GUIDE ADJUSTMENT
weaverleathersupply.com
800-932-8371
PROBLEM REMEDY
Ruined or dull blade edge.
Sharpen or replace blades.
Weaver Leather offers blade sharpening service.
Deep wrinkles on bottom roll.
Rearrange spacers and blades on drive shaft
or replace bottom roll.
Incorrect position of bottom roll
Turn the Adjustment Wheels (A and B) to the
(it’s too far from blades).
left until the blades skim the bottom roll.
