16
2.5.1.5 CAN OPERATION
The CAN protocol provides an encapsulated form of the existing datalink used
for remote operation. CAN port is shown in Figure 7. This port is not terminated
within the unit. The supported bit rate is 250k baud rate. Contact Customer
Service Department for additional information.
Figure 7. ROS RS-232 and CAN Bus Ports
2.5.1.6 ETHERNET FIBER OPERATIONS
The Ethernet fiber protocol provides an encapsulated form of the existing datalink
used for remote operation (see Figure 8). Contact Webasto’s Customer Service
Department for additional information.
Figure 8. Connected Ethernet Fiber
2.5.1.7 REMOTE EMERGENCY STOP (OPERATIONAL)
Within the 900 EX there is a provision to allow installation of an external switch
to control the emergency stop function of the system. To enable a system
provided with this option, an electrical connection must be made between Pins 1
and 4 of this interface (Figure 9). Opening this connection will induce a complete
power-down of the 900 EX.
Summary of Contents for 900EX
