If your heater was not selected correctly at Initial Start-Up a Manual Reset is required.
Press the On/Off Button to go to the Main Menu Screen and follow the following steps.
Select the symbol “Settings”
Press the Control Knob
The “Quick Start” menu is displayed
Turn the Control Knob clockwise 10 times until “Reset” is displayed
Select “Reset” by pressing the Control Knob
Press the Control Knob to confirm.
The Control Knob is now restarted
During the restart of the Control Knob, an Hourglass will quickly appear
Press the Control Knob and the On/Off Button simultaneously for 3 seconds
The Control is now ready for use.
Select your Heater (Note: PHEC System is displayed as TT - Z/C/E HS)
Press the Control Knob
Hea ng
MAX
Dura on
Select “Heating”
Press the Control Knob
Press the Control Knob to select continuous (infinite) running.
(OR To program a Timer at this point turn the Control Knob clockwise to select the time from
10 minutes to 2 hours).
Continuous (Infinite) Running has been selected
Operation
