Webb 193806006 Original Instructions Manual Download

Page: 5 / 28

1. Drive Lever

(WERR17SP Only)

2. Brake (OPC) Lever

3. Fuel Tank

4. Air Filter / Primer Bulb

5. Spark Plug

7. Oil Filter and Dipstick

9. Grass Collection Bag

8. Recoil Rope

6. Muffler / Exhaust

ASSEMBLY INSTRUCTIONS - LF43SPBR 17" Roller model

Remove the machine and all components from the carton. Assemble as follows:

1a.

Select the left hand

the two studs on the

right hand side of the

mower,

ensure that the

U shape of the handle

goes towards the

chassis

Select the right hand

the two studs on the left

hand side of the mower,

ensure that the U shape of the handle

goes towards the

chassis. Fix with two

cap head nuts.

wire recoil rope guide

to the right hand clamp

bolt, this goes on the

inside of the handle

between the handle

and the securing nut.

6. Fit the Operator

Presence Cable,

remove the lever from

its mounting by easing it

from the handle, attach

the Z cable end to the

OPC lever as shown in

lever to the handle.

8. Ensure you have

attached the correct

cable to the correct

lever.

Assemble the upper

handle to the lower

handle using the two

clamp bolts and nuts,

ensuring that the large

washer goes against the

clamp handle on the

outside of the handle

as per the photo.

Tension clamp bolts

to ensure the handles

7. Fit the Self Propelled

drive cable, again

remove the lever from

its mounting by gen-

tly easing it from the

handle, attach the Z

cable end to the Self

Propelled drive lever as

the lever to the handle.

9. Fit the cable router

to the handle using the

securing bolt supplied,

the inside of the handle

as per the photo.

10. Hold in the

Operator control handle

and pull on the recoil

starter rope so you can

attach it through the

wire recoil rope guide.

1b.

Fix with two cap

head nuts.

Set the grass bag

and grass bag frame

together then lock the

plastic buckles on the

grass bag frame.

ASSEMBLY INSTRUCTIONS - LF43SPBR 17" Roller model

Remove the machine and all components from the carton. Assemble as follows:

1a.

Select the left hand

the two studs on the

right hand side of the

mower,

ensure that the

U shape of the handle

goes towards the

chassis

Select the right hand

the two studs on the left

hand side of the mower,

ensure that the U shape of the handle

goes towards the

chassis. Fix with two

cap head nuts.

wire recoil rope guide

to the right hand clamp

bolt, this goes on the

inside of the handle

between the handle

and the securing nut.

6. Fit the Operator

Presence Cable,

remove the lever from

its mounting by easing it

from the handle, attach

the Z cable end to the

OPC lever as shown in

lever to the handle.

8. Ensure you have

attached the correct

cable to the correct

lever.

Assemble the upper

handle to the lower

handle using the two

clamp bolts and nuts,

ensuring that the large

washer goes against the

clamp handle on the

outside of the handle

as per the photo.

Tension clamp bolts

to ensure the handles

7. Fit the Self Propelled

drive cable, again

remove the lever from

its mounting by gen-

tly easing it from the

handle, attach the Z

cable end to the Self

Propelled drive lever as

the lever to the handle.

9. Fit the cable router

to the handle using the

securing bolt supplied,

the inside of the handle

as per the photo.

10. Hold in the

Operator control handle

and pull on the recoil

starter rope so you can

attach it through the

wire recoil rope guide.

1b.

Fix with two cap

head nuts.

Set the grass bag

and grass bag frame

together then lock the

plastic buckles on the

grass bag frame.

ASSEMBLY INSTRUCTIONS - LF43SPBR 17" Roller model

Remove the machine and all components from the carton. Assemble as follows:

1a.

Select the left hand

the two studs on the

right hand side of the

mower,

ensure that the

U shape of the handle

goes towards the

chassis

Select the right hand

the two studs on the left

hand side of the mower,

ensure that the U shape of the handle

goes towards the

chassis. Fix with two

cap head nuts.

wire recoil rope guide

to the right hand clamp

bolt, this goes on the

inside of the handle

between the handle

and the securing nut.

6. Fit the Operator

Presence Cable,

remove the lever from

its mounting by easing it

from the handle, attach

the Z cable end to the

OPC lever as shown in

lever to the handle.

8. Ensure you have

attached the correct

cable to the correct

lever.

Assemble the upper

handle to the lower

handle using the two

clamp bolts and nuts,

ensuring that the large

washer goes against the

clamp handle on the

outside of the handle

as per the photo.

Tension clamp bolts

to ensure the handles

7. Fit the Self Propelled

drive cable, again

remove the lever from

its mounting by gen-

tly easing it from the

handle, attach the Z

cable end to the Self

Propelled drive lever as

the lever to the handle.

9. Fit the cable router

to the handle using the

securing bolt supplied,

the inside of the handle

as per the photo.

10. Hold in the

Operator control handle

and pull on the recoil

starter rope so you can

attach it through the

wire recoil rope guide.

1b.

Fix with two cap

head nuts.

Set the grass bag

and grass bag frame

together then lock the

plastic buckles on the

grass bag frame.

ASSEMBLY INSTRUCTIONS - LF43SPBR 17" Roller model

Remove the machine and all components from the carton. Assemble as follows:

1a.

Select the left hand

the two studs on the

right hand side of the

mower,

ensure that the

U shape of the handle

goes towards the

chassis

Select the right hand

the two studs on the left

hand side of the mower,

ensure that the U shape of the handle

goes towards the

chassis. Fix with two

cap head nuts.

wire recoil rope guide

to the right hand clamp

bolt, this goes on the

inside of the handle

between the handle

and the securing nut.

6. Fit the Operator

Presence Cable,

remove the lever from

its mounting by easing it

from the handle, attach

the Z cable end to the

OPC lever as shown in

lever to the handle.

8. Ensure you have

attached the correct

cable to the correct

lever.

Assemble the upper

handle to the lower

handle using the two

clamp bolts and nuts,

ensuring that the large

washer goes against the

clamp handle on the

outside of the handle

as per the photo.

Tension clamp bolts

to ensure the handles

7. Fit the Self Propelled

drive cable, again

remove the lever from

its mounting by gen-

tly easing it from the

handle, attach the Z

cable end to the Self

Propelled drive lever as

the lever to the handle.

9. Fit the cable router

to the handle using the

securing bolt supplied,

the inside of the handle

as per the photo.

10. Hold in the

Operator control handle

and pull on the recoil

starter rope so you can

attach it through the

wire recoil rope guide.

1b.

Fix with two cap

head nuts.

Set the grass bag

and grass bag frame

together then lock the

plastic buckles on the

grass bag frame.

ASSEMBLY INSTRUCTIONS - LF43SPBR 17" Roller model

Remove the machine and all components from the carton. Assemble as follows:

1a.

Select the left hand

the two studs on the

right hand side of the

mower,

ensure that the

U shape of the handle

goes towards the

chassis

Select the right hand

the two studs on the left

hand side of the mower,

ensure that the U shape of the handle

goes towards the

chassis. Fix with two

cap head nuts.

wire recoil rope guide

to the right hand clamp

bolt, this goes on the

inside of the handle

between the handle

and the securing nut.

6. Fit the Operator

Presence Cable,

remove the lever from

its mounting by easing it

from the handle, attach

the Z cable end to the

OPC lever as shown in

lever to the handle.

8. Ensure you have

attached the correct

cable to the correct

lever.

Assemble the upper

handle to the lower

handle using the two

clamp bolts and nuts,

ensuring that the large

washer goes against the

clamp handle on the

outside of the handle

as per the photo.

Tension clamp bolts

to ensure the handles

7. Fit the Self Propelled

drive cable, again

remove the lever from

its mounting by gen-

tly easing it from the

handle, attach the Z

cable end to the Self

Propelled drive lever as

the lever to the handle.

9. Fit the cable router

to the handle using the

securing bolt supplied,

the inside of the handle

as per the photo.

10. Hold in the

Operator control handle

and pull on the recoil

starter rope so you can

attach it through the

wire recoil rope guide.

1b.

Fix with two cap

head nuts.

Set the grass bag

and grass bag frame

together then lock the

plastic buckles on the

grass bag frame.

ASSEMBLY INSTRUCTIONS - LF43SPBR 17" Roller model

Remove the machine and all components from the carton. Assemble as follows:

1a.

Select the left hand

the two studs on the

right hand side of the

mower,

ensure that the

U shape of the handle

goes towards the

chassis

Select the right hand

the two studs on the left

hand side of the mower,

ensure that the U shape of the handle

goes towards the

chassis. Fix with two

cap head nuts.

wire recoil rope guide

to the right hand clamp

bolt, this goes on the

inside of the handle

between the handle

and the securing nut.

6. Fit the Operator

Presence Cable,

remove the lever from

its mounting by easing it

from the handle, attach

the Z cable end to the

OPC lever as shown in

lever to the handle.

8. Ensure you have

attached the correct

cable to the correct

lever.

Assemble the upper

handle to the lower

handle using the two

clamp bolts and nuts,

ensuring that the large

washer goes against the

clamp handle on the

outside of the handle

as per the photo.

Tension clamp bolts

to ensure the handles

7. Fit the Self Propelled

drive cable, again

remove the lever from

its mounting by gen-

tly easing it from the

handle, attach the Z

cable end to the Self

Propelled drive lever as

the lever to the handle.

9. Fit the cable router

to the handle using the

securing bolt supplied,

the inside of the handle

as per the photo.

10. Hold in the

Operator control handle

and pull on the recoil

starter rope so you can

attach it through the

wire recoil rope guide.

1b.

Fix with two cap

head nuts.

Set the grass bag

and grass bag frame

together then lock the

plastic buckles on the

grass bag frame.

BOX CONTENTS / PRODUCT DIAGRAM

×1

×2

×1

×2

10.

×1

×4

What

ou get with

your mower

Please read & understand this manual, paying particular attention to the safety instructions, before use.

Operator’s Manual & Parts List

29 Oct 2015

193864001

51cm Self Propelled

High Wheeled

Steel Deck Lawnmower

WER51SPHW

1. Petrol Engine Mower

2. Instruction Manual

3. Rear Grass Catcher

4. Rope Guide

5. Spanners

6. Bolt and Nut Assembly

7. Spark Plug Socket

8. Cable Ties

9. Mulch Plug

10. Quick Release Handle

INSTRUCTION MANUAL

1. Drive Lever

(WERR17SP Only)

2. Brake (OPC) Lever

3. Fuel Tank

4. Air Filter / Primer Bulb

5. Spark Plug

7. Oil Filter and Dipstick

9. Grass Collection Bag

8. Recoil Rope

6. Muffler / Exhaust

ASSEMBLY INSTRUCTIONS - LF43SPBR 17" Roller model

Remove the machine and all components from the carton. Assemble as follows:

1a.

Select the left hand

the two studs on the

right hand side of the

mower,

ensure that the

U shape of the handle

goes towards the

chassis

Select the right hand

the two studs on the left

hand side of the mower,

ensure that the U shape of the handle

goes towards the

chassis. Fix with two

cap head nuts.

wire recoil rope guide

to the right hand clamp

bolt, this goes on the

inside of the handle

between the handle

and the securing nut.

6. Fit the Operator

Presence Cable,

remove the lever from

its mounting by easing it

from the handle, attach

the Z cable end to the

OPC lever as shown in

lever to the handle.

8. Ensure you have

attached the correct

cable to the correct

lever.

Assemble the upper

handle to the lower

handle using the two

clamp bolts and nuts,

ensuring that the large

washer goes against the

clamp handle on the

outside of the handle

as per the photo.

Tension clamp bolts

to ensure the handles

7. Fit the Self Propelled

drive cable, again

remove the lever from

its mounting by gen-

tly easing it from the

handle, attach the Z

cable end to the Self

Propelled drive lever as

the lever to the handle.

9. Fit the cable router

to the handle using the

securing bolt supplied,

the inside of the handle

as per the photo.

10. Hold in the

Operator control handle

and pull on the recoil

starter rope so you can

attach it through the

wire recoil rope guide.

1b.

Fix with two cap

head nuts.

Set the grass bag

and grass bag frame

together then lock the

plastic buckles on the

grass bag frame.

ASSEMBLY INSTRUCTIONS - LF43SPBR 17" Roller model

Remove the machine and all components from the carton. Assemble as follows:

1a.

Select the left hand

the two studs on the

right hand side of the

mower,

ensure that the

U shape of the handle

goes towards the

chassis

Select the right hand

the two studs on the left

hand side of the mower,

ensure that the U shape of the handle

goes towards the

chassis. Fix with two

cap head nuts.

wire recoil rope guide

to the right hand clamp

bolt, this goes on the

inside of the handle

between the handle

and the securing nut.

6. Fit the Operator

Presence Cable,

remove the lever from

its mounting by easing it

from the handle, attach

the Z cable end to the

OPC lever as shown in

lever to the handle.

8. Ensure you have

attached the correct

cable to the correct

lever.

Assemble the upper

handle to the lower

handle using the two

clamp bolts and nuts,

ensuring that the large

washer goes against the

clamp handle on the

outside of the handle

as per the photo.

Tension clamp bolts

to ensure the handles

7. Fit the Self Propelled

drive cable, again

remove the lever from

its mounting by gen-

tly easing it from the

handle, attach the Z

cable end to the Self

Propelled drive lever as

the lever to the handle.

9. Fit the cable router

to the handle using the

securing bolt supplied,

the inside of the handle

as per the photo.

10. Hold in the

Operator control handle

and pull on the recoil

starter rope so you can

attach it through the

wire recoil rope guide.

1b.

Fix with two cap

head nuts.

Set the grass bag

and grass bag frame

together then lock the

plastic buckles on the

grass bag frame.

ASSEMBLY INSTRUCTIONS - LF43SPBR 17" Roller model

Remove the machine and all components from the carton. Assemble as follows:

1a.

Select the left hand

the two studs on the

right hand side of the

mower,

ensure that the

U shape of the handle

goes towards the

chassis

Select the right hand

the two studs on the left

hand side of the mower,

ensure that the U shape of the handle

goes towards the

chassis. Fix with two

cap head nuts.

wire recoil rope guide

to the right hand clamp

bolt, this goes on the

inside of the handle

between the handle

and the securing nut.

6. Fit the Operator

Presence Cable,

remove the lever from

its mounting by easing it

from the handle, attach

the Z cable end to the

OPC lever as shown in

lever to the handle.

8. Ensure you have

attached the correct

cable to the correct

lever.

Assemble the upper

handle to the lower

handle using the two

clamp bolts and nuts,

ensuring that the large

washer goes against the

clamp handle on the

outside of the handle

as per the photo.

Tension clamp bolts

to ensure the handles

7. Fit the Self Propelled

drive cable, again

remove the lever from

its mounting by gen-

tly easing it from the

handle, attach the Z

cable end to the Self

Propelled drive lever as

the lever to the handle.

9. Fit the cable router

to the handle using the

securing bolt supplied,

the inside of the handle

as per the photo.

10. Hold in the

Operator control handle

and pull on the recoil

starter rope so you can

attach it through the

wire recoil rope guide.

1b.

Fix with two cap

head nuts.

Set the grass bag

and grass bag frame

together then lock the

plastic buckles on the

grass bag frame.

ASSEMBLY INSTRUCTIONS - LF43SPBR 17" Roller model

Remove the machine and all components from the carton. Assemble as follows:

1a.

Select the left hand

the two studs on the

right hand side of the

mower,

ensure that the

U shape of the handle

goes towards the

chassis

Select the right hand

the two studs on the left

hand side of the mower,

ensure that the U shape of the handle

goes towards the

chassis. Fix with two

cap head nuts.

wire recoil rope guide

to the right hand clamp

bolt, this goes on the

inside of the handle

between the handle

and the securing nut.

6. Fit the Operator

Presence Cable,

remove the lever from

its mounting by easing it

from the handle, attach

the Z cable end to the

OPC lever as shown in

lever to the handle.

8. Ensure you have

attached the correct

cable to the correct

lever.

Assemble the upper

handle to the lower

handle using the two

clamp bolts and nuts,

ensuring that the large

washer goes against the

clamp handle on the

outside of the handle

as per the photo.

Tension clamp bolts

to ensure the handles

7. Fit the Self Propelled

drive cable, again

remove the lever from

its mounting by gen-

tly easing it from the

handle, attach the Z

cable end to the Self

Propelled drive lever as

the lever to the handle.

9. Fit the cable router

to the handle using the

securing bolt supplied,

the inside of the handle

as per the photo.

10. Hold in the

Operator control handle

and pull on the recoil

starter rope so you can

attach it through the

wire recoil rope guide.

1b.

Fix with two cap

head nuts.

Set the grass bag

and grass bag frame

together then lock the

plastic buckles on the

grass bag frame.

ASSEMBLY INSTRUCTIONS - LF43SPBR 17" Roller model

Remove the machine and all components from the carton. Assemble as follows:

1a.

Select the left hand

the two studs on the

right hand side of the

mower,

ensure that the

U shape of the handle

goes towards the

chassis

Select the right hand

the two studs on the left

hand side of the mower,

ensure that the U shape of the handle

goes towards the

chassis. Fix with two

cap head nuts.

wire recoil rope guide

to the right hand clamp

bolt, this goes on the

inside of the handle

between the handle

and the securing nut.

6. Fit the Operator

Presence Cable,

remove the lever from

its mounting by easing it

from the handle, attach

the Z cable end to the

OPC lever as shown in

lever to the handle.

8. Ensure you have

attached the correct

cable to the correct

lever.

Assemble the upper

handle to the lower

handle using the two

clamp bolts and nuts,

ensuring that the large

washer goes against the

clamp handle on the

outside of the handle

as per the photo.

Tension clamp bolts

to ensure the handles

7. Fit the Self Propelled

drive cable, again

remove the lever from

its mounting by gen-

tly easing it from the

handle, attach the Z

cable end to the Self

Propelled drive lever as

the lever to the handle.

9. Fit the cable router

to the handle using the

securing bolt supplied,

the inside of the handle

as per the photo.

10. Hold in the

Operator control handle

and pull on the recoil

starter rope so you can

attach it through the

wire recoil rope guide.

1b.

Fix with two cap

head nuts.

Set the grass bag

and grass bag frame

together then lock the

plastic buckles on the

grass bag frame.

ASSEMBLY INSTRUCTIONS - LF43SPBR 17" Roller model

Remove the machine and all components from the carton. Assemble as follows:

1a.

Select the left hand

the two studs on the

right hand side of the

mower,

ensure that the

U shape of the handle

goes towards the

chassis

Select the right hand

the two studs on the left

hand side of the mower,

ensure that the U shape of the handle

goes towards the

chassis. Fix with two

cap head nuts.

wire recoil rope guide

to the right hand clamp

bolt, this goes on the

inside of the handle

between the handle

and the securing nut.

6. Fit the Operator

Presence Cable,

remove the lever from

its mounting by easing it

from the handle, attach

the Z cable end to the

OPC lever as shown in

lever to the handle.

8. Ensure you have

attached the correct

cable to the correct

lever.

Assemble the upper

handle to the lower

handle using the two

clamp bolts and nuts,

ensuring that the large

washer goes against the

clamp handle on the

outside of the handle

as per the photo.

Tension clamp bolts

to ensure the handles

7. Fit the Self Propelled

drive cable, again

remove the lever from

its mounting by gen-

tly easing it from the

handle, attach the Z

cable end to the Self

Propelled drive lever as

the lever to the handle.

9. Fit the cable router

to the handle using the

securing bolt supplied,

the inside of the handle

as per the photo.

10. Hold in the

Operator control handle

and pull on the recoil

starter rope so you can

attach it through the

wire recoil rope guide.

1b.

Fix with two cap

head nuts.

Set the grass bag

and grass bag frame

together then lock the

plastic buckles on the

grass bag frame.

BOX CONTENTS / PRODUCT DIAGRAM

×1

×2

×1

×2

10.

×1

×4

What

ou get with

your mower

Please read & understand this manual, paying particular attention to the safety instructions, before use.

Operator’s Manual & Parts List

29 Oct 2015

193864001

51cm Self Propelled

High Wheeled

Steel Deck Lawnmower

WER51SPHW

1. Petrol Engine Mower

2. Instruction Manual

3. Rear Grass Catcher

4. Rope Guide

5. Spanners

6. Bolt and Nut Assembly

7. Spark Plug Socket

8. Cable Ties

9. Mulch Plug

10. Quick Release Handle

INSTRUCTION MANUAL

Summary of Contents for 193806006





























Search results

Summary of Contents for 193806006

Reviews:

Related manuals for 193806006

Brands by name

Popular brands

Webb 193806006, Original Instructions Manual

Search results

Summary of Contents for 193806006

Reviews:

Related manuals for 193806006

Brands by name

Popular brands