GRASS COLLECTOR
ASSEMBLY
1.
Assemble the grass collector and tongue to one another using fixings supplied.
FITTING
1.
Lift the grass collector flap up, so that it opens past the handle assembly. Hold in position and place the
grass collector hooks over the springs and place into position.
2.
Lower the grass collector flap to sit onto the grass collector.
Using the grass collector, ensures your cuttings are forced to the back of the collector, using air generated by
the rotation of the cutting blade. Once full, stop the machine and turn off the engine. Remove the spark plug
cap from the spark plug. Empty the grass cuttings.
CABLE TIDY
1.
Place the cable tidy over the handle assembly and house the cables into the tidy.
RECOIL STARTER HANDLE
1.
To ease starting of the machine, the recoil starter handle can be housed on the handle assembly.
2.
To house it correctly, pull the OPC/Brake lever towards the main handle. Do not let go.
3.
Now grab the recoil starter handle and slowly lift it towards the housing. There will be some resistance
and do not pull too hard. Wrap the Starter rope through the housing and seat the recoil starter housing.
4.
You can now release the OPC/Brake lever.
CUTTING FUNCTIONS (Model Specific)
NOTE: These functions can be converted by changing accessory setting. Please see the following chart for
detail setting.
Fitted
Mulch Plug
(WER21ALSP ONLY)
Grass Collector
Side Discharge
Chute
(WER21ALSP ONLY)
Rear Discharge
Function
Rear Discharge
No
No
No
Yes
Collection
No
Yes
No
No
Mulching
Yes
No
No
No
Side Discharge
Yes
No
Yes
No
INSTRUCTION MANUAL
Summary of Contents for 1938290001
