background image

This Service Book is provided with your Webb, to help you look after your purchase to our recommendations and 

enable you to take advantage of the conditional manufacturer domestic warranty*. 

Present this service book to your authorised Webb repair dealer, whenever a service or a warranty appraisal is 

required.

The booklet is applicable to the following products, in the UK only:

Ride On Lawn Tractors

Cylinder Lawnmowers

Petrol Rotary Lawnmowers

Petrol Hand Held Range

Please register your machine using the following pages or at www.webbgardenpower.co.uk. By registering your 

machine, you agree to maintain the machine in accordance with the service schedules specifi ed in this manual and 

services duly recorded. (Not applicable for Webb electric handheld machines). You may be asked to produce this 

booklet as proof of servicing in the event of a claim. Proof of purchase should also be kept as a reference.

Ensure you have the following information available from your machine product label. The two examples below can 

be found on your machine:

1

2

1.   Model Number

2.  Serial  & Product Number

Please complete using BLOCK CAPITALS. 

Sections marked* must be completed to validate Warranty. 

1. Users Statement of Warranty

Each new machine is warranted against defective material or assembly of material under normal usage. The 

warranty applies to the original purchaser, is not transferable and covers faulty parts and the labour involved in 

replacing and repairing those parts, which are of original manufacture.

2. Period of Warranty - valid from 1 January 2020

Webb (excludes Dynamic, Legacy & Heritage)

, 2 year conditional warranty from the original date of sale to the fi rst 

domestic user.

Webb (Dynamic, Legacy & Heritage) 

1 year warranty from the original date of sale to the fi rst domestic user.

90 days from the original date of sale to the professional/commercial or for hire user.

Engine warranty as per the engine manufacturer’s warranty, which will be supplied with the machine.

90 days from the original date of sale for Replacement Spare Parts 

All machines’ must be serviced within the fi rst 14 months from the original date of purchase, to qualify for a second 

year parts & labour warranty, details of the service must be recorded in the service record within this manual.

A reduced warranty period of 90 days applies to those items which are subject to normal wear and tear and in 

normal use, will need replacement or adjustment.

These items are chargeable after 90 days of ownership. 

Filters 

Tyres / Wheels

Drive chains and belts 

Brake & clutch friction components

Control cable & starter cords

Fluids & lubricants

Spark plugs

Blades (Lawnmowers & Brushcutters)

Cutter bars (Hedgecutters)

Drive & clutch cable surfaces

Nylon Lines (Line Trimmers)

Carburettor cleaning

Bearings

Bushes

Electric cable

Grass collectors

3. Not covered by this warranty

(a) The warranty policy does not cover any depreciation or damages caused by ordinary wear, rusting or corrosion, 

lack of correct maintenance or operation, misuse, abuse, lack of transportation or accident.

(b) The warranty policy does not cover any costs necessary for the standard periodic maintenance services 

instructed by the operators manual, or service parts replacement w

hich would include oil, fi lters, tyres, belts, brake 

linings, fuses, blades, seals and other service parts unless it can be proven that the item has evidence of faulty 

manufacture.

(c) The warranty policy will not cover failure or damage caused as a result of parts or accessories being modifi ed 

without the written approval of GJ Handy & Co Ltd.

(d) The warranty policy will not cover the unit if non-genuine parts have been fi t

ted and as a result damage has 

occurred to the unit.

(e) The warranty policy is non-transferable and is only applicable to the original purchaser.

4. Disclaimer

(a) This warranty is only a remedy for defect of products. GJ Handy & Co Ltd will never warranty in terms of the 

merchantability or the fi tness for a particular purpose.

(b) No person is authorised to make any warranties, representations or promises, expressed or implied, on behalf of 

GJ Handy & Co Ltd, or to modify the terms conditions or limitation of this warranty policy in any way.

INSTRUCTION MANUAL

Summary of Contents for 1938290001













































Reviews: