Webb WEER38 Operator'S Manual Download

Page: 17 / 20

EC Declaration of Conformity

We, Importer

Handy Distribution

SN3 4NS

Declare that the product

Designation: 1400w Electric Lawnmower

Model: WEER38

Complies with the following directives:

2006/42/EC -

Machinery Directive

2006/95/EC –

Low Voltage Directive

2004/108/EC -

Electromagnetic Compatibility Directive

2000/14/EC, Annex VI -

Noise Emission in the Environment by Equipment for

Use Outdoors Directive.

The conformity assessment procedure followed was in accordance with

Directive 2006/42/EC

Name of the Notified Body: TÜV SÜD Industrie Service GmbH, Westendstrasse 199, 80686 München,

Deutschland

- Guaranteed Sound Power Level: 96 dB (A)

Standards and technical specifications referred to:

2004/108/EC -

EN 55014-1/2006/A1: 2009, EN 55014-2:1997/A1: 2001/A2: 2008,

EN 61000-3-2: 2006/A1 :2009/A2: 2009, EN 61000-3-11: 2000, EN61000-4-7 :2002, IEC 61000-4-2,

IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-11, IEC 61000-4-13

2006/42/EC –

EN 50366, EN 60335-1 :2002 + A11: 2004, A1: 2004 + A12: 2006 + A2: 2006 + A13 :2008 +

A14: 2010, EN 60335-1/A14: 2010, EN 60335-2-77: 2010, EN 62233: 2005, 2008

CR 1030-1: 1995, EN 62335-2-77: 2010, EN ISO 354 :1993, EN ISO 3767-1, EN ISO 3767-3, EN ISO 3767-5,

ISO 3864, EN ISO 4871: 1996, EN ISO 11201: 1995, 1996, EN ISO 11688-1: 1998, EN ISO 11691: 1995, EN

ISO 11820: 1996, EN ISO 12100-2: 2003, EN ISO 13857: 2008, EN ISO 20643: 2005, EN ISO 3744: 1995,

UNE-EN 50075, IEC60034-1, IEC 60068-2-2, IEC 60068-2-32, IEC 60068-2-75, IEC 60083:1975, IEC 60112,

IEC 60127, 60227 IEC 41, 60227 IEC 52, 60227 IEC 53, IEC 60238, 60245 IEC 86, 60245 IEC 51,

60245 IEC 53, 60245 IEC 57, 60245 IEC 87, 60245 IEC 88, IEC 60249-2-4, IEC 60249-2-5, IEC 60309-2,

IEC 60320-1, IEC 60320-2-2, IEC 60320-2-3, IEC 60384-14, IEC 60417-5036, IEC 60529, IEC 60664-1,

IEC 60664-3, IEC 60695-2-2, IEC 60695-2-11, IEC 60695-2-12, IEC 60695-2-13, IEC 60695-10-2, IEC 60695-

11-10, IEC 60730-1, IEC 60730-2-8, IEC 60884-1, IEC 60906-1, IEC 60990, IEC 60999-1, , IEC 61032, IEC

61058-1, IEC 61180-1, IEC 61558-1, IEC 61558-2-6, IEC 61770, IEC 68-2-32, ISO4046:1978, ISO9772

2006/95/EC –

EN 62233: 2005, 2008

2000/14/EC, Annex VI -

EN ISO 3744:1995

2005/88/EC

ZEK01.2-08:2008

Authorised signatory and technical file holder

Date: 19/03/2013

Signature:
Name / title: Mr. Simon Belcher / Managing Director
Hobley Drive, Stratton St Margaret, Swindon, Wiltshire, SN3 4NS.

Summary of Contents for WEER38





















Search results

Summary of Contents for WEER38

Reviews:

Related manuals for WEER38

Brands by name

Popular brands

Webb WEER38, Operator'S Manual

Search results

Summary of Contents for WEER38

Reviews:

Related manuals for WEER38

Brands by name

Popular brands