ASSEMBLY/PRE-OPERATION
Read this instruction manual in its entirety before you assemble or operate your new lawnmower.
Your new lawnmower has been assembled and tested at the factory.
Roll the lawnmower out of the carton and check the carton thoroughly for additional loose parts.
IMPORTANT
:
The lawnmower is shipped
WITHOUT OIL OR PETROL
in the engine. Failure to fill the engine with the
correct fluids & to the correct levels will invalidate your warranty.
OPERATION CABLES
To avoid damage during the transport process, the drive and brake cables for your machine may not be fitted
to their appropriate handle bar.
The front cable is the brake cable, which is to be fitted to the front lever on your machine, this is the Operator
Presence Control Lever (OPC). The cable at the rear is your drive cable, which is to be fitted to the rear
lever, which is your Drive Lever.
Apply inward pressure to the lever assembly on the left hand side of the machine, to remove the lever lug
from the handle assembly.
Brake Cable
Drive Cable
