18
CR 3-II E
1
2
3
4
7
6
5
Cleaning the engine oil filter
Drain engine oil.
Loosen the screw (4) approximately 5 revolutions.
When working in the area of the engine compartment
there is danger of being burned!
Screw the oil drain pipe (2) onto the engine drain valve (3)
and drain the oil.
After emptying completely, unscrew the oil drain pipe
from the drain valve and fill with oil in accordance with the
specification.
Risk of scalding due to hot oil.
Only drain engine oil when at operating temperature.
When working in the area of the engine compartment
there is danger of being burned!
Risk of scalding due to hot oil.
Maintenance work
Changing the engine oil
Open the screw cap of the oil filler neck (1).
Prior to tightening the screws, ensure that the tension
springs rest on the oil filter with both ends (7).
Pull the oil filter (5) out of the motor compartment.
Blow out the oil filter (5) from inside to outside with com
-
pressed air.
Lightly oil the sealing rings (6) on both sides of the oil filter.
Check sealing rings (6) for damage and firm seat, replace
the oil filter if there is damage.
Press the oil filter into the crankcase as far as it will go.
Summary of Contents for CR 3-II E
Page 2: ...2 CR 3 II E...
Page 26: ...26 CR 3 II E...
