CR 9-II CCD 2.0
9
1
2
3
4
6
7
5
When the ignition is switched on, the LED (1) will light up
10 hours prior to the next scheduled maintenance.
In addition, the operating hours (2) until the next maintenance
will be displayed.
After approx. 3 seconds, the operating hours display changes
to the total operating hours.
The LED display (3) lights up, indicating that the engine is
in operation.
Operating status: OK!
Oil pressure indicator (4) is illuminated. Oil pressure too low.
Engine shuts down immediately.
Error must be corrected prior to restart.
Graphic presentation – MDM motor protection
Charge level LED (5) is illuminated.
Charging voltage too low or not available.
Battery is not being charged.
Engine does not switch off.
Temperature LED (6) is illuminated.
Engine temperature too high.
The engine is shut down 3 minutes after
the LED comes on.
Ail filter LED (7) is illuminated.
Air filter is fouled up.
The engine is shut down 10 minutes after
the LED comes on.
Summary of Contents for CR 9-II
Page 2: ...2 CR 9 II CCD 2 0...
Page 28: ...28 CR 9 II CCD 2 0...
Page 29: ...CR 9 II CCD 2 0 29...
Page 30: ...30 CR 9 II CCD 2 0...
