3.3
Operating conditions
The permissible operating temperature range for the cutters lies between -20° C and +55° C.
Reliable functioning of the equipment cannot be guaranteed outside this range.
Underwater operation
The cutters (exception: SPS 270 H) can also be used under water. Do not exceed the maximum
submersion depth of 40 metres with this. At this depth the water pressure still has no
influence on the hydraulic pressure in the equipment and the hoses.
NOTE !
After underwater use in saltwater, the equipment must be completely
disassembled and cleaned. With fresh water complete cleaning is
sufficient.
3.4
Type plate
The type plate can be found on the device body of all cutting devices. Here you can find the
serial number, manufacturing date, nominal pressure, equipment designation and the EN
standard.