BURNER FLAME PATTERN
The Weber
®
gas side burner is manufactured to perform with the proper air and gas
mixture. The correct flame pattern is shown.
1) Burner
cap
2)
Tips occasionally flicker yellow
3) Light
blue
4) Dark
blue
If the flames do not appear to be uniform throughout the burner Head, follow the burner
cleaning procedures.
•
Remove Side Burner Cap
(a)
and wash with a soft cloth and a soap and water
solution.
•
Brush debris from Burner Head
(b)
using a non-metallic brush. Wash with a soft
cloth and a soap and water solution. Dry Burner Head thoroughly.
3
1
2
4
a
b
CLEANING
WARNING: Turn your Weber
®
Gas Side Burner off and wait
for it to cool before cleaning.
Inside surfaces - Use a warm soapy water solution to clean, then rinse with water.
CAUTION: Do not use oven cleaner, abrasive cleansers
(kitchen cleansers), cleaners that contain citrus products, or
abrasive cleaning pads on the appliance.
Grease tray - Pull grease tray out of Side Burner Box. Remove excess grease and
moisture, wash with warm soapy water, then rinse.
Stainless steel surfaces - Wash with a soft cloth and a soap and water solution. Be
careful to scrub with the grain direction of the stainless steel.
Do not use cleaners that contain acid, mineral spirits or xylene. Rinse well after
cleaning.
Preserve Your Stainless Steel - Your Side Burner, lid, control panel and grease tray are
made from stainless steel. To keep the stainless steel looking its best is a simple matter.
Clean it with soap and water, rinse with clear water and wipe dry. For stubborn particles,
the use of a non-metallic brush can be used.
IMPORTANT: Do not use a wire brush or abrasive cleaners
on the stainless steel surfaces of your Side Burner as this
will cause scratches.
IMPORTANT: When cleaning surfaces be sure to rub/wipe
in the direction of the grain to preserve the look of your
stainless steel.
16
WWW.WEBER.COM
®
GENERAL MAINTENANCE
Summary of Contents for 62434
Page 43: ...43 NOTES 43 WWW WEBER COM...
