Chapter 8
Operation
32708885 Geset 100
Version: 16.07.13
Page 56 of 77
GB
Control element (Pushbutton box)
Fig. 8-3: Display- and operator elements
No.
Description
1
EMERGENCY STOP PUSHBUTTON
2
RED BUTTON AUTOMATIC OFF
3
GREEN ILLUMINATED BUTTON AUTOMATIC ON
Turn on labeling operation
The automatic operation is used to label products.
Requirements
¥
Labeling system is turned off.
¥
Material rolls at labeling system loaded and threaded.
¥
Labeling system is connected to power and compressed air.
¥
System was put into operation (see chapter „Installation and initial startup” on
page 38).
Instruction
Please turn on the labeling system for operation as follows.
Step
Procedure
1
Turn on the main switch.
RISK OF INJURY FROM CRUSHING!
-
Maintain a distance from moving parts
2
Push the [START] –button at labeler.
3
Push the [AUTOMATIC ON] –button at control element.
4
Add the products to the labeling station.
5
Remove the products from outfeed of labeling system.
Summary of Contents for Geset 100
Page 2: ...Blank page ...