-16 -
Balancing programs
The balancing programs must be selected by pressing the button next to the programs.
Standard program
Active without display in switch-on mode
Balancing steel or alloy wheels using balancing weights at the rim
edges.
Static program
The STATIC correction is used for motorcycle wheels and for wheels on
which a weight does not have to be applied on both sides of the rim.
ALU1
Balancing of alloy wheels with self-adhesive weights on the shoulder of
the rim.
ALU2
Balancing of alloy wheels with 2 adhesive weights on the inside.
ALU3
Balancing of light-alloy wheels with an impact weight and an adhesive
weight on the inside.
F-motorcycle programme
Balancing steel or alloy wheels by means of weights at the rim edges.
Press the "F" key to open this program.
Installation of the motorcycle clamping shaft (accessories)
Unscrew the car-wheel-clamping shaft with the central screw (p. 8 fig.
3). Screw the motorcycle's adapter shaft as shown in the illustrations
below.
