14
1
Shutting down
Bring the gas lever to the “min.” (1) lock-in position.
Do not switch off the engine under full load; let engine
run idle for a few minutes.
During breaks – even if they are short – the machine
must be shut down.
Parked devices that represent an obstacle must be
safeguarded against through conspicuous measures.
To switch the engine off – move gas lever to 0 / OFF.
Tamping (at temperatures below 5° Celsius)
Put the tamper into operation as described before.
Lift the tamper as shown in the adjacent figure and let it run
for approx. 5 seconds.
Increased accident danger! Always wear personal pro
-
tective equipment. Operating the tamper is not permit
-
ted without wearing the necessary personal protective
equipment.
Hard hat
Safety shoes
Protective gloves
Personal protective equipment includes:
Wear ear protection
Summary of Contents for SRV 300
