First, connect the battery plug to the matching input on the
computer (includes USB charger) and then connect the USB
charge to a USB power source. When battery is charging, LED
light is on When fully charged, LED light is off. Charging time is
about 50-60 minutes. Flight time is around 5 minutes. Do not leave
charging battery unattended.
Press quickly for 360-degree flip.
Press longer for auto return
Left/right sideways
trimming
Transmitter
Use 2 AAA batteries and insert batteries as per the correct
polarities (DO NOT mix batteries of different sizes). Do not
mix old and new batteries. Do not mix alkaline,
standard(carbon-zinc), or re-chargeable batteries.
FORBIDDEN
Up/down, turn left/right. Boot
default slow-speed mode,
press enter into high-speed
mode, then press again to
enter into headless mode.
Press once again to exit
headless mode and enter
into slow speed mode
Please read the instruction manual carefully before
using and keep for future reference.
1* Quadcopter
1* USB
Charging wires
4*Blade
2.1 Instruction of Transmitter :
2.2 Install Batteries:
1*Battery
1*Screw driver
1*Transmitter
1* Instruction Manual
Under no circumstance should you
disassemble battery cover
Model:SG-F8
