Wedderburn Operator Manual
Page 4 of 12
WS202 Digital Bench Scale
1.6.
Electrical Safety
The WS202 scale is powered by a internal 6V 4.5Ah rechargeable battery.
This battery is recharged by connection to a 240V supply a 12V 0.83A transformer fitted within the scale
body.
Where possible, the use of an approved RCD (Residual Current Device) connected to 240V power circuits is
recommended
.
1.7.
Disposal of Battery
Be mindful that batteries contain heavy metals and toxic elements such as nickel, cadmium, mercury and
lead acid. If batteries are disposed of in land fill these elements can leak out and damage our environment.
Please consider disposal of used batteries in recycle programs.
Recycle programs that are set up to dispose of used batteries:
•
Contact your local council for recycling options.
1.8.
Correct Use
•
Ensure that staff that will be using the WS202 scale are instructed in the correct use of the
instrument and are made aware of the above safety instructions.
•
Incorrect use, placement or handling of the scale may result in damage and possible injury.
2.
Inspection Instructions
2.1.
Initial Inspection
Upon receiving your new WS202 scale you should:
•
Unpack the scale carefully.
•
Check the scale immediately after unpacking for externally visible damage.
•
Ensure that scale is complete and that all parts are present.
If there is any issue regarding the results of this inspection, please do not use the scale but contact
Wedderburn Online immediately.
2.2.
User Inspection
Periodically inspect your WS202 scale to ensure that it is still in good order. Ensure that regular user
inspections of your equipment have been performed.
If faults are found, please contact Wedderburn to have it rectified.
