Weed Eater 438178 Operator'S Manual Download

Page: 10 / 16

Mulcher plug

TO CONVERT MOWER
Your lawn mower was shipped ready to be
used as a mulcher. To convert to bagging
or discharging:

REAR BAGGING
• Open rear door and remove mulcher

plug. Store mulcher plug in a safe
place.

• You can now install grass catcher.
• To convert to mulching or discharging

operation, install mulcher plug into rear
discharge opening of mower.

SIDE DISCHARGING
• Mulcher plug must be installed into rear

discharge open ing of mower (see above
instructions).

• Open mulcher door and install dis charge

defl ector under door as shown.

• Mower is now ready for discharging

operation.

• To convert to mulching or bagging

operation, dis charge defl ector must be
removed and mulcher door must be
closed.

Open mulcher door

Discharge defl ector

SIMPLE STEPS TO REMEMBER WHEN
CONVERTING YOUR LAWN MOWER:
FOR MULCHING -
• Rear mulcher plug installed and rear

door closed.

• Mulcher door closed.

FOR REAR BAGGING -
•   Rear mulcher plug removed.
•   Grass catcher installed.
•   Mulcher door closed.

FOR SIDE DISCHARGING -
• Rear mulcher plug installed and rear

door closed.

• Discharge defl ector installed.

CAUTION: Do not run your lawn mower

without rear mulcher plug or approved
grass catcher in place. Never at tempt to
op er ate the lawn mow er with the rear door
re moved or propped open.

OPERATION

Summary of Contents for 438178

















Search results

Summary of Contents for 438178

Reviews:

Related manuals for 438178

Brands by name

Popular brands

Weed Eater 438178, Operator'S Manual

Search results

Summary of Contents for 438178

Reviews:

Related manuals for 438178

Brands by name

Popular brands