background image

12

GENERAL RECOMMENDATIONS

The warranty on this lawn mower does not 
cover items that have been subjected to 
operator abuse or negligence.  To receive 
full value from the war ranty, operator 
must maintain mower as instructed in this 
manual.
Some adjustments will need to be made 
periodically to properly maintain your unit.  
All adjustments in the Service and Adjust-
ments section of this manual should be 
checked at least once each season.
•   Once a year, check blade for wear.
•   Follow the Maintenance Sched ule in this 

manual.

BEFORE EACH USE
•   Check for loose fasteners.
•   Charge the battery.  The three green 

LEDs on the battery will light when the 
battery is fully charged.

LUBRICATION
Keep unit well lubricated

Spray 

lubricant

Rear door 

hinge rod

Handle bracket mounting pins

Mulcher door 

hinge rod

IMPORTANT:  Do not oil or grease plastic 
wheel bearings.  Viscous lu bri cants will 
attract dust and dirt that will short en the life 
of the self-lu bri cat ing bearings.  If you feel 
they must be lu bri cated, use only a dry, 
pow dered graphite type lubricant sparingly.

MAINTENANCE

Check for Loose Fasteners

Clean / Inspect Grass Catcher

Check Tires

Clean Lawn Mower *

Check / Sharpen / Replace Blade **

Lubrication

Recharge Battery

BEFORE

EACH

USE

AFTER

EACH

USE

EVERY

10

HOURS

EVERY

25 HOURS

OR SEASON

BEFORE

STORAGE

* Use a scraper to clean under deck      ** Replace blades more often when mowing in sandy soil

Summary of Contents for 438178

















Reviews: