background image

7

MEETS CPSC SAFETY REQUIREMENTS
Our rotary walk-behind lawn mowers conform to the safety standards of the American 
National Standards Institute and the U.S. Consumer Product Safety Commission.

 WARNING: The blade turns when the motor is running.

KNOW YOUR LAWN MOWER

READ THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING 
YOUR LAWN MOWER.  Compare the illustrations with your lawn mower to familiarize 
yourself with the location of various controls and adjustments.  Save this manual for 
future reference. 

OPERATION

Operator presence control bar  – must 
be held down to the handle to start the 
motor.  Release to stop the motor.
Start button – used for starting the motor.
Single point height adjuster – used to 
adjust cutting height of lawn mower.

Mulcher plug – located at the rear dis-
 charge opening.  Must be removed when 
converting to bagging operation.
Mulcher door – allows con ver sion to 
discharging or bagging operation.

Mulcher door

Discharge 
guard

Single point height 
adjuster handle

Grass 
catcher

Start button

Operator presence control bar

Handle 
knob

Wing 
nut

Cam 
lock

Circuit breaker

Motor housing

Mulcher 

plug

Extension 
cord 
retainer

Power 
cord

Summary of Contents for 438184

















Reviews: