38
6
36
18
18
5
4
3
26
2
1
27
27
13
55
12
19
19
17
14
17
29
30
63
63 62
22
64
28
10
61
25
31
37
50
49
48
59
34
34
52
35
53
32
37
7
19
19
40
40
37
57
20
56
57
20
LRV-B_Deck_4_r1
RIDING MOWER
MODEL NUMBER WELRVBA (96026000100)
MOWER DECK
PRODUCT NUMBER 960 26 00-01
7
Your new riding mower has been assembled at the factory with the exception of those parts
left unassembled for shipping purposes. To ensure safe and proper operation of your riding
mower all parts and hardware you as sem ble must be tightened securely. Use the correct
tools as nec es sary to ensure proper tightness.
TOOLS REQUIRED FOR ASSEMBLY
A socket wrench set will make assembly
easier. Stan dard wrench sizes you need
are listed below.
(1) 1/2" wrench
(1) Utility knife
(1) Tire pressure gauge
When right or left hand is mentioned in
this man ual, it means when you are in the
operating po si tion (seated be hind the steer-
ing wheel).
TO REMOVE RIDING MOWER FROM
CARTON
UNPACK CARTON
1. Remove all accessible loose parts and
parts boxes from carton.
2. Cut along dotted lines on all four panels
of carton. Remove end panels and lay
side panels flat.
3. Remove packing materials from riding
mower.
4. Check for any additional loose parts or
cartons and remove.
NOTE:
Only cut carton with a short blade
utility knife, a long blade or saw can puncture
tires on unit.
ASSEMBLY/PRE-OPERATION
TO INSTALL STEERING WHEEL
1. Slide extension shaft onto steering shaft.
2. Slide steering shaft protective foam cover
over steering shaft.
3. Place steering boot over steering shaft
and push down to secure.
4. Position front wheels of the riding mower
so they are pointing straight forward.
5. Remove steering wheel adapter from
steering wheel and slide adapter onto
steering shaft.
7. Press steering wheel into position on
shaft, install large washer, lock washer,
bolt and tighten securely.
8. Snap steering wheel insert into center of
steering wheel securely.
Foam Cover
Adapter
Steering Wheel
Insert
Washer
Lock Washer
Bolt
Steering Shaft
Steering Boot
Extension
Shaft
HOW TO SET UP YOUR RIDING
MOWER
CHECK BATTERY
Ensure battery is securely fastened, and that
all wires are securely connected.
• Battery is located under the seat.
• Battery has been fully charged from the
factory, before installation.
Seat
Battery
