www.weedrazers.com
6
Notes:
Blade Sharpening Instructions
(con’t)
Step 7
To sharpen ONE SIDE of the blade only, use the
insert (2) with one pointed carbide tip and one
rounded metal guide. Press the inside edge of the
carbide insert against the edge of the blade you
want to sharpen. Run the carbide over the entire
edge four to six times with consistent pressure.
Repeat this process for the other side of the blade.
NOTE: We recommend using the process in
STEP 6 for greater consistency in sharpening.
Step 8
In the end of the sharpener’s handle (4), you will
find a screw-in felt pad and oil for lubricating
the blades. We encourage you to use the Weed
Razer Sharpening Tool for all of your sharpening
needs. When you are sharpening other tools that
may rust or corrode, add a few drops of oil to the
lubricating pad and apply to each blade after every
sharpening.
