background image

Copyrights 

© 2015 All rights reserved. The information in this 

document is subject to change without prior notice in 

order to improve reliability, design and function and does 

not represent a commitment on the part of the 

manufacturer.   

 

This document contains proprietary information 

protected by copyright.    All rights are reserved.    No 

part of this manual may be reproduced by any 

mechanical, electronic, or other means in any form 

without prior written permission of the manufacturer.   

 

All trademarks are property of their respective 

owners 

 

Liability Disclaimer 

In no event will the manufacturer be liable for direct, 

indirect, special, incidental, or consequential 

damages arising out of the use or inability to use the 

product or documentation, even if advised of the 

possibility of such damages.   

 

Regulatory Information 

FCC Notices   

 

This equipment has been tested and found to comply 

with the limits for a Class A digital device, pursuant to 

Part 15 of the Federal Communications Commission 

(FCC) Rules. These limits are designed to provide 

reasonable protection against harmful interference in 

a residential installation. This equipment generates, 

uses, and can radiate radio frequency energy and, if 

not installed and used in accordance with the 

instructions, may cause harmful interference to radio 

communications. However, there is no guarantee 

that interference will not occur in a particular 

installation. If this equipment does cause harmful 

interference to radio or television reception, which 

can be determined by turning the equipment off and 

on, the user is encouraged to try to correct the 

interference by one or more of the following 

measures: 

• Increase the separation between the equipment 

and the receiver. 

• Connect the equipment into an outlet on a circuit 

different from that to which the receiver is connected. 

• Consult the dealer or an experienced radio or 

television technician for help. 

This device complies with Part 15 (A) of the FCC 

Rules. Operation is subject to the following two 

conditions:   

1) this device may not cause harmful interference 

and   

2) this device must accept any interference received, 

including interference that may cause undesired 

operation. 

NOTE: THE MANUFACTURER IS NOT 

RESPONSIBLE FOR ANY RADIO OR TV 

INTERFERENCE CAUSED BY UNAUTHORIZED 

MODIFICATIONS TO THIS DEVICE. SUCH 

MODIFICATIONS COULD VOID THE USER'S 

AUTHORITY TO OPERATE THE DEVICE.

 

 

CE Notice 

 

This device complies with 

EMC Directive 

2004/108/EC

 issued by the Commission of the 

European Community. 

 

Summary of Contents for XPOS72A-5B-1900



















Reviews: