6
7
「 3 in 1 Robot Gripper—Four Cross Finger Gripper 」
4xScrew M4*10
1xN30 Motor Bracket
4xNylon Locknut M3
2xScrew M3*14
2xScrew M3*20
2xFinger Assembly
▶ 07：Assemble the Bottom N30 Motor Bracket
▶ 08：Turn Two Finger Gripper to Four Cross Finger Gripper
→
→
Note: If you need a robot
gripper with only two fingers,
install it to this step.
Congratulations, the two-finger
gripper robot is installed.
「 3 in 1 Robot Gripper—Four Cross Finger Gripper 」
Congratulations, the four cross finger Gripper
robot is installed.
2x Screw M3*20
2x Screw M3*14
Note:
Please tighten the locknut with proper
force so that the installation is firm. In the
meantime, DO NOT crush the acrylic.
