8
9
「 3 in 1 Robot Gripper—Parallel Four Finger Gripper 」
「 3 in 1 Robot Gripper—Parallel Four Finger Gripper 」
4xNylon Locknut M
4xScrew M3*16
1xForearm
4xHind Arm
1xFixed Arm
1xScrew M3*45
1xNylon Locknut M3
2xAluminum Column4*6*6
1xTraction Arm
▶ 01:Assemble the Gripper Finger
▶ 01:Assemble the Gripper Finger
→
→
Note:
1. Please remove the protective paper on acrylic before
assemble.
2. Assemble the tow arm and pay attention to the direction
as shown.
3. Lock nylon locknut M3 as shown, do not screw too tight in
avoid of locking the finger joints. The locknut should be
attached to the acrylic, and the screw can rotate freely.
Note:
1. Please remove the protective paper on acrylic before assemble.
2. Assemble the tow arm and pay attention to the direction as shown.
3. Lock nylon locknut M3 as shown, do not screw too tight in avoid of
locking the finger joints. The locknut should be attached to the acrylic,
and the screw can rotate freely.
One group finger assembly
Assemble two groups