RGB Ultrasonic Sensor is new ultrasonic
distance detection module.
Comes with independent RGB LED, you can
change brightness and color.
The RGB Ultrasonic Sensor uses split
high-precision aluminum shell probe,calcu-
late and amplify signal through onboard
MCU, to output more stable and higher
precision signal.
Touch Sensor enables you to replace
traditional “press” button by touch it. It can
detect the change in capacitance when a
finger is nearby.
That means no matter whether your finger
directly touch the pad or just stay close to
the pad, it will be detected by the sensor.
130 DC Motor Module is a funny module. It
has a 130 DC motor which is fixed on circuit
board for easy-using.
You can build funny projects such as
cooling machine, smart fan, bubble
machine.
4 digital LED module adopts a 4-digit
common anode digital tube for displaying
numbers and a few special characters. The
module can be used in robot project to
display data such as speed, time, score,
temperature, distance, etc.
Highlight 4 digital LED display, allow users to see the content
even in the day.
RJ11 port for easy connection.
2*4mm installation holes.
Comes with built-in MCU, the module type can be automatically
identified by main control.
Adopt unibus driver, reduced the IO pin of main control chip.
Highlight 7 segment display, allow users to see
the content even in the day.
RJ11 port for easy connection.
2*4mm installation holes.
Comes with built-in MCU, the module type can
be automatically identified by main control.
Adopt unibus driver, reduced the IO pin of main
control chip.
Distance defecting resolution is 2cm；
Comes with 6 RGB LEDs, support 256 brightness values for red,
green & blue and 16,777,216 color combinations;
Adopt RJ11 port for easy connection.
3*4mm installation holes.
Comes with built-in MCU, the module type can be automatically
identified by main control.
Adopt unibus driver, reduced the IO pin of main control chip.
Touch sensor will enter self-calibrate mode to make a reference
point in 4 secs since powered on. Do not touch the module in
self-calibrate mode in order to reduce misjudgment..
Sensitive and short time delay.
Adopt RJ11 port for easy connection.
2*4mm installation holes.
Comes with built-in MCU, the module type can be automatical-
ly identified by main control.
Adopt unibus driver, reduced the IO pin of main control chip.
Two LED indicates the rotation direction of the motor
Rotation direction and speed can be controlled.
Adopt RJ11 port for easy connection.
2*4mm installation holes.
Comes with built-in MCU, the module type can be automatically
identified by main control.
Adopt unibus driver, reduced the IO pin of main control chip.
Operating Voltage: 5V DC
Detection Angle: ≤30°
Detection Range: 4-500cm
Resolution: 1cm
Ultrasonic Frequency: 42kHz
Probe Angle: 60°±15°
Communication: 1-wire
Dimensions: 100 x 32 x 30 mm
Picture
Description
Features
Specification
Operating voltage: 5V DC
Response time: 60-220ms
Used Chipset: TTP223
Control mode: Unibus signal
Module size: 52 x 24 x 18 mm (L x W x H)
Operating voltage: 5V DC.
No Load Speed: 12000±10%rpm
No Load Current: 90±10% mA
Control mode: Single bus digital signal
Module size: 60 x 24 x 20 mm (L x W x H)(no
fan blade)
Sensors and Electronic Modules Guide
Summary of Contents for Home Inventor Kit
