DIAMOND DERMABRASION
Cautions
1.
Correctly connect one side of the pipe to the rear
panel as indicated in the sketch.
2.
Connect the opposite side of the pipe to the vacuum
handle. Place the correct diamond head in the handle.
There are nine types of diamond heads.
3.
Check that the foam filter is in its proper position in
the handle.
4.
Check that the metal filter is in its proper position in
the handle.
5.
You can adjust the suction effect by covering or
uncovering the hole in the side of the handle with your
finger.
6.
Select the desired energy and time. You can change
setting anytime during working.
7.
Press “START/PAUSE” button to start.
•
Do not leave the handle on the same part of skin for
too long since it can cause injuries.
•
Avoid using it on irritated skin.
•
The following skin areas are unsuitable for these
treatments: skin tumors, moles, birthmarks,
angiomas, lips, eyes, herpes and warts.
•
Do not operate the suction pump for prolonged
periods without cooling time between treatments to
prevent pump overheating and damage to the
machine. Damage caused by overheating of the pump
are not covered by the manufacturer's warranty.
Ø 22 MM
D100
D180
Body. Suitable for acne, knees, elbows
and areas with stretch marks
Ø 8 Y 6 MM
D200
D250
Eyes and both sides of the nose.
Wrinkles, acne, pimples and
blackheads
Ø 19 MM
D180
D220
Face. Suitable for large spots, pores,
aging sun exposure
Ø 15 MM
D100
D200
D250
Scars, fine lines and various imperfec-
tions
