3
CFW-11M RB |3-35
Installation and Connection
The synchronism transformers are supplied by WEG for the panel assembly together with the CFW-11M RB
regenerative converter. Figure 3.48 shows this assembly.
NOTE!
Transformer shield must be grounded.
Figure 3.48 -
Example of transformer assembling
NOTE!
Consult WEG for the complete specification of the synchronism transfomer!
Figure 3.49 shows the CSR11 synchronism board. The signals from the synchronism transformer are
connected at the XC1 connector figure 3.51 shows the cable connection.The connection with the CC11 RB
control board is done via XC50 connector. Figure 3.50 show the synchronism board assembly on the UC11.
XC50
XC1
1
5
Figure 3.49 -
Synchronism board
