Applications
19
CFW700 | 19-27
P1000 – SoftPLC Status
P1001 – SoftPLC Command
P1002 – Scan Cycle Time
P1003 – SoftPLC Applicative Selection
NOTE!
chapters 12 - Functions Common to all the Control Modes
.
P1010 – Version of the 3-Wire Start/Stop Application
Adjustable
Range:
0.00 to 10.00
Factory
Setting:
-
Properties:
ro
Access groups
via HMI:
SPLC
Description:
Read only parameter that presents the software version of the 3-Wire Start/Stop application developed for the
SoftPLC function of the CFW700.
19.6 FORWARD/REVERSE RUN APPLICATION
19.6.1 Description and Definitions
The CFW700 has the FORWARD/REVERSE RUN application that allows the combination of two inverter commands
(Forward/Reverse and Start/Stop) in a single digital input.
This way, the digital input (DIx) programmed to “Function 1 of the Application (Forward)” combines the forward
rotation with the start/stop command and the input (DIx) programmed to “Function 2 of the Application (Reverse)”
combines the reverse rotation with the start/stop command. The picture below show how it works.
Open
24 V
24 V
Open
Time
Time
Time
Dlx - Forward
Forward
Dlx - Reverse
Reverse
Motor Speed
Figure 19.8:
Operation of the Forward/Reverse Run Application
Summary of Contents for CFW700
