7-16 | MVW3000
7
7-16 | MVW3000
7
Optional Accessories and Boards
XC8 connector (female DB9)
(*)
Connection of the external power supply: 5 V to 15 V,
consumption: 100 mA @ 5 V not including the outputs.
Note: The external power supply can also be connected at:
XC4: 19 and XC4: 20 (EBA) or
XC5: 19 and XC5: 20 (EBB)
MVW3000 EBA or EBB board
9 6
5 1
NOTE!
There is no internal power supply
for XC8 on the expansion boards
EBA and EBB.
XC8 connector
Description
3
A
2
A
1
B
9
B
8
Z
7
Z
4
+V
(*)
Supply
(*)
6
COM 1
(*)
0 V reference
5
Ground
Encoder signals
Line driver
differential
(88C30)
Average current:
50 mA high level
Figure 7.18:
Encoder signal repeater output
7.3.2 EBC1 Board
When the board EBC1 is used, the selected encoder should have the following characteristics:
Power supply voltage: 5 V to 15 V.
2 quadrature channels (90 º) with complementary outputs (differential): Signals A, A, B and B.
"Linedriver" ou "Push-Pull" output circuit type (with identical level as the power supply voltage).
Electronic circuit isolated from the encoder frame.
Recommended number of pulses per revolution: 1024 ppr.
INSTALLATION OF THE EBC1 BOARD
The EBC board is installed directly on the MVC4 control board, secured by means of spacers and connected
through the XC3 connector.
Mounting instructions:
1. De-energize the control rack.
2. Carefully insert the pins of the connector XC3 (EBC1) into the female connector XC3 of the MVC4 control board.
Make sure that all pins fit in the XC3 connector.
3. Press on the board center (near to XC3) until the connector is completely inserted.
4. Secure the board to the 2 metallic spacers with the 2 provided bolts.
Summary of Contents for MVW3000 A0040 V023
